🚚 Free Worldwide Shipping on All Orders!Shop Now
M14 gear for Porsche 924 944 -85 speedometer odometer repair V2
If at your transaxle the counter from the odometer no longer runs along, this gear is usually broken. The repair is not complicated and preserves your speedometer in its original condition.
Variants:
!US models have the M17 installed. Just search for "M17" in the store!
Usually the M11 or M14 is installed in the 924 models. Occasionally it is a M15. Write to us or count your number of teeth before buying.
Hint:
We also recommend replacing the roller gear (on the same shaft). It is the second most common weak point in the drive. If the roller wheel can be turned on the shaft, it is already damaged. There are 3 different thickness variants here (tooth width D1.3; D2.2; D3.0).
Measure the tooth width of the gear and order the suitable one in the store if needed.
Service:
We have over 100 gear variants in our assortment and can supply the matching gears if required!
+ all alternative sizes constantly in stock
+ fast exchange service in case of size deviation.
For the repair, we will send you an illustrated repair manual (German/English) by email.
Quality:
Our gears are elaborately injection molded true to the original and are not 3D printed proprietary parts. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is maintained, which is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
partworks is a German brand which specializes in the reproduction of young and oldtimer spare parts. Special emphasis is placed on high quality and good service. More than 15,000 car fans worldwide are already satisfied customers with the small company from Paderborn. As a specialist company for classic car spare parts, partworks GmbH is aware of the quality demands of its customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very closely oriented to the original or even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO certified quality management confirms the thoroughness of our work.
Reference numbers:
94464131000, 944.641.310.00, 944 641 310 00,
477919033B,
Variants:
!US models have the M17 installed. Just search for "M17" in the store!
Usually the M11 or M14 is installed in the 924 models. Occasionally it is a M15. Write to us or count your number of teeth before buying.
Hint:
We also recommend replacing the roller gear (on the same shaft). It is the second most common weak point in the drive. If the roller wheel can be turned on the shaft, it is already damaged. There are 3 different thickness variants here (tooth width D1.3; D2.2; D3.0).
Measure the tooth width of the gear and order the suitable one in the store if needed.
Service:
We have over 100 gear variants in our assortment and can supply the matching gears if required!
+ all alternative sizes constantly in stock
+ fast exchange service in case of size deviation.
For the repair, we will send you an illustrated repair manual (German/English) by email.
Quality:
Our gears are elaborately injection molded true to the original and are not 3D printed proprietary parts. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is maintained, which is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
partworks is a German brand which specializes in the reproduction of young and oldtimer spare parts. Special emphasis is placed on high quality and good service. More than 15,000 car fans worldwide are already satisfied customers with the small company from Paderborn. As a specialist company for classic car spare parts, partworks GmbH is aware of the quality demands of its customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very closely oriented to the original or even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO certified quality management confirms the thoroughness of our work.
Reference numbers:
94464131000, 944.641.310.00, 944 641 310 00,
477919033B,
$4,118.20
M14 gear for Porsche 924 944 -85 speedometer odometer repair V2—
$4,118.20
Description
If at your transaxle the counter from the odometer no longer runs along, this gear is usually broken. The repair is not complicated and preserves your speedometer in its original condition.
Variants:
!US models have the M17 installed. Just search for "M17" in the store!
Usually the M11 or M14 is installed in the 924 models. Occasionally it is a M15. Write to us or count your number of teeth before buying.
Hint:
We also recommend replacing the roller gear (on the same shaft). It is the second most common weak point in the drive. If the roller wheel can be turned on the shaft, it is already damaged. There are 3 different thickness variants here (tooth width D1.3; D2.2; D3.0).
Measure the tooth width of the gear and order the suitable one in the store if needed.
Service:
We have over 100 gear variants in our assortment and can supply the matching gears if required!
+ all alternative sizes constantly in stock
+ fast exchange service in case of size deviation.
For the repair, we will send you an illustrated repair manual (German/English) by email.
Quality:
Our gears are elaborately injection molded true to the original and are not 3D printed proprietary parts. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is maintained, which is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
partworks is a German brand which specializes in the reproduction of young and oldtimer spare parts. Special emphasis is placed on high quality and good service. More than 15,000 car fans worldwide are already satisfied customers with the small company from Paderborn. As a specialist company for classic car spare parts, partworks GmbH is aware of the quality demands of its customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very closely oriented to the original or even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO certified quality management confirms the thoroughness of our work.
Reference numbers:
94464131000, 944.641.310.00, 944 641 310 00,
477919033B,
Variants:
!US models have the M17 installed. Just search for "M17" in the store!
Usually the M11 or M14 is installed in the 924 models. Occasionally it is a M15. Write to us or count your number of teeth before buying.
Hint:
We also recommend replacing the roller gear (on the same shaft). It is the second most common weak point in the drive. If the roller wheel can be turned on the shaft, it is already damaged. There are 3 different thickness variants here (tooth width D1.3; D2.2; D3.0).
Measure the tooth width of the gear and order the suitable one in the store if needed.
Service:
We have over 100 gear variants in our assortment and can supply the matching gears if required!
+ all alternative sizes constantly in stock
+ fast exchange service in case of size deviation.
For the repair, we will send you an illustrated repair manual (German/English) by email.
Quality:
Our gears are elaborately injection molded true to the original and are not 3D printed proprietary parts. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions.
The so-called involute tooth geometry is maintained, which is the only way to ensure low-friction sliding of the tooth flanks between the gear pairs.
The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation.
partworks is a German brand which specializes in the reproduction of young and oldtimer spare parts. Special emphasis is placed on high quality and good service. More than 15,000 car fans worldwide are already satisfied customers with the small company from Paderborn. As a specialist company for classic car spare parts, partworks GmbH is aware of the quality demands of its customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very closely oriented to the original or even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO certified quality management confirms the thoroughness of our work.
Reference numbers:
94464131000, 944.641.310.00, 944 641 310 00,
477919033B,
